Đang xử lý.....
Thiết bị chuyển mạch CISCO CBS350 Managed 24-port GE POE+, 370W power budget, 4x10G SFP+
Mã: CBS350-24FP-4X-EU
Hãng: CISCO
Mô tả:
Hãng sản xuất Cisco 
Chuẩn switch Rack-mountable
Cổng đồng 24 cổng 10/100/1000 Mbps
Cổng SFP 4 cổng SFP 10Gb
Cổng cấu hình Console
Cổng POE 24 cổng PoE+
Công suất POE 370W
Công suất tiêu thụ với PoE 110V=451.8W 220V=437.4W
Loại chuyển mạch Layer 3, layer 2
Xếp tầng 4 units Up to 192 ports
Switching capacity 128 Gbps
Packet Buffer 1.5 MB
Nguồn nuôi 100-240 V, 50-60 Hz, Internal
Bảo hành 12 tháng
Tình trạng hàng Mới 100%
1 VNĐ
    THÔNG TIN SẢN PHẨM

        CBS350-24FP-4X-EU là thiết bị chuyển mạch được quản lý thuộc dòng sản phẩm CBS 350 Series. CBS350-24FP-4X-EU cung cấp 24 cổng 10/100/1000 PoE+ 370W và 4 cổng 10G SFP+ uplink. Thiết bị này có giá thành rẻ, lý tưởng để xây dựng một hệ thống mạng hoàn chỉnh tại các doanh nghiệp mà vẫn tiết kiệm được chi phí đầu tư.

          CBS350-24FP-4X-EU được thiết kế nhỏ gọn với màu trắng bắt mắt, mang đến hiệu suất mạnh mẽ, khả năng bảo mật cao kết hợp cùng bộ tính năng toàn diện cho việc quản lý, kết nối, giám sát và truyền tải dữ liệu. CBS350-24FP-4X-EU hỗ trợ cấp nguồn qua PoE, đi kèm tính năng truestacking cho phép định cấu hình, quản lý và khắc phục sự cố của tất cả thiết bị chuyển mạch trong một stack như một thiết bị duy nhất với một địa chỉ IP duy nhất

         Hơn nữa, Cisco CBS350-24FP-4X-EU có thể cài đặt và cấu hình dễ dàng, đi kèm bảng điều khiển cấp doanh nghiệp, hỗ trợ IPv6 và khả năng quản lý lưu lượng truy cập lớp 3 nâng cao. Ngoài ra, Cisco Business CBS350-24FP-4X-EU cũng được tích hợp nhiều giải pháp hỗ trợ hiệu quả cho việc tiết kiệm điện năng tiêu thụ.
     

    Thiết bị chuyển mạch CISCO CBS350 Managed 24-port GE POE+, 370W power budget, 4x10G SFP+
    Model CBS350-24FP-4X-EU
    Performance
    Capacity in millions of packets per second (mpps) (64-byte packets) 95.23 mpps
    Switching capacity 128Gbps
    Stacking
    Hardware stacking Up to 4 units in a stack. Up to 192 ports managed as a single system with hardware failover
    High availability Fast stack failover delivers minimal traffic loss. Support link aggregation across multiple units in a stack
    Plug-and-play stacking configuration/management Active/standby for resilient stack control
    Autonumbering
    Hot swap of units in stack
    Ring and chain stacking options, auto stacking port speed, flexible stacking port options
    High-speed stack interconnects Cost-effective high-speed 10G fiber interfaces
    General
    Jumbo frames Frame sizes up to 9K bytes. The default MTU is 2K bytes
    MAC table 16K addresses
    Hardware
    Total System Ports 24 x Gigabit Ethernet + 4 x 10G
    RJ-45 Ports 24 x Gigabit Ethernet
    Combo Ports (RJ45 + Small form-factor pluggable [SFP]) 4 x SFP+
    Number of Ports That Support PoE 24
    Power Dedicated to PoE 370W
    Console port Cisco standard mini USB Type-B/RJ45 console port
    USB slot USB Type-A slot on the front panel of the switch for easy file and image management
    Buttons Reset button
    Cabling type Unshielded Twisted Pair (UTP) Category 5e or better for 1000BASE-T
    LEDs System, Link/Act, PoE, Speed
    Flash 256 MB
    CPU 800 MHz ARM
    DRAM 512 MB
    Packet buffer 1.5 MB
    Power consumption (worst case)
    System Power Consumption 110V=47.14W
    220V=47.01W
    Power Consumption (with PoE) 110V=451.8W
    220V=437.4W
    Heat Dissipation (BTU/hr) 1,544.34
    Environmental
    Unit dimensions (W x D x H) 445 x 345 x 44 mm
    Unit weight 4.6 kg
    Power 100-240V 50-60 Hz, internal, universal
    Certification UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A
    Operating temperature -5° to 50°C
    Storage temperature -25° to 70°C
    Operating humidity 10% to 90%, relative, noncondensing
    Storage humidity 10% to 90%, relative, noncondensing
    Acoustic noise and Mean Time Between Failure (MTBF)
    FAN (Number) 1
    Acoustic Noise 25°C: 34.8 dBA
    MTBF at 25°C (hours) 698,220