|
Category
|
Specifications
|
|
|
|
Radios
|
2.4 GHz 802.11b/g/n/ax client access radio
|
|
|
|
5 GHz 802.11a/n/ac/ax client access radio
|
|
|
|
2.4 GHz & 5 GHz dual-band WIDS/WIPS, spectrum analysis, & location analytics radio
|
|
|
|
2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support
|
|
|
|
Concurrent operation of all four radios
|
|
|
|
Supported frequency bands (country-specific restrictions apply):
|
|
|
|
2.412 - 2.484 GHz
|
|
|
|
5.150 - 5.250 GHz (UNII-1)
|
|
|
|
5.250 - 5.350 GHZ (UNII-2A)
|
|
|
|
5.490 - 5.730 GHz (UNII-2C)
|
|
|
|
5.735 -5.825 GHz (UNII-3)
|
|
|
|
|
|
|
|
Antenna
|
Internal Antenna (5.4 dBi gain at 2.4 GHz, 6 dBi gain at 5 GHz)
|
|
|
| |
|
|
802.11ax, 802.11ac Wave 2 and 802.11n Capabilities
|
DL-OFDMA**, UL-OFDMA**, TWT support**, BSS Coloring**
|
|
|
|
2 x 2 multiple input, multiple output (MIMO) with two spatial streams
|
|
|
|
SU-MIMO, UL MU-MIMO** and DL MU-MIMO support
|
|
|
|
Maximal ratio combining (MRC) & beamforming
|
|
|
|
20 and 40 MHz* channels (802.11n); 20, 40*, and 80 MHz channels (802.11ac Wave 2); 20, 40* and 80 MHz channels (802.11ax)
|
|
|
|
|
|
|
|
Note: *40MHz channels are supported only in the 5GHz band..
|
|
|
|
|
|
|
|
Up to 1024-QAM on both 2.4 GHz & 5 GHz bands
|
|
|
|
Packet aggregation
|
|
|
|
|
|
|
|
Power
|
Power over Ethernet: 37 - 57 V (802.3af compatible)
|
|
|
|
Alternative: 12 V DC input
|
|
|
|
Power consumption: 15W max (802.3af). Note: actual power consumption may vary depending on the AP usage.
|
|
|
|
Power over Ethernet injector and DC adapter sold separately
|
|
|
|
|
|
|
|
Note: Actual power consumption may vary depending on the AP usage.
|
|
|
|
Interfaces
|
1x 10/100/1000 BASE-T Ethernet (RJ45)
|
|
|
|
1x DC power connector (5.5 mm x 2.5 mm, center positive)
|
|
|
|
|
|
|
|
Mounting
|
All standard mounting hardware included
|
|
|
|
Desktop, ceiling, and wall mount capable
|
|
|
|
Ceiling tile rail (9/16, 15/16 or 1 1⁄2” flush or recessed rails), assorted cable junction boxes
|
|
|
|
Bubble level on mounting cradle for accurate horizontal wall mounting
|
|
|
|
|
|
|
|
Physical Security
|
Two security screw options (included) (10 mm long and 2.5 mm diameter and 4.7 mm head)
|
|
|
|
Kensington lock hard point
|
|
|
|
Concealed mount plate with anti-tamper cable bay
|
|
|
|
|
|
|
|
Environment
|
Operating temperature: 32 °F to 104 °F (0 °C to 40 °C)
|
|
|
|
Humidity: 5 to 95% non-condensing
|
|
|
|
Operating altitude: Up to 40,000 feet (12,192 meters)
|
|
|
|
|
|
|
|
Reliability
|
Mean Time Between Failure (MTBF): 257,215hrs at +25°C operating temperature
|
|
|
| |
|
|
Physical Dimensions
|
9.84” x 4.72” x 1.42” (25 cm x 12 cm x 3.6 cm), not including desk mount feet or mount plate
|
|
|
|
Weight: 17.35 oz (492 g)
|
|
|
|
|
|
|
|
Security
|
Integrated Layer 7 firewall with mobile device policy management
|
|
|
|
Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal
|
|
|
|
Flexible guest access with device isolation
|
|
|
|
VLAN tagging (802.1q) and tunneling with IPsec VPN
|
|
|
|
PCI compliance reporting
|
|
|
|
WEP***, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3 - Personal**, WPA3 - Enterprise**, WPA3 - Enhanced Open (OWE)**
|
|
|
|
EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM
|
|
|
|
TKIP and AES encryption
|
|
|
|
Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration
|
|
|
|
Cisco ISE integration for Guest access and BYOD Posturing
|
|
|
|
|
|
|
|
Quality of Service
|
Advanced Power Save (U-APSD)
|
|
|
|
WMM Access Categories with DSCP and 802.1p support
|
|
|
|
Layer 7 application traffic identification and shaping
|
|
|
|
|
|
|
|
Mobility
|
PMK, OKC, & 802.11r for fast Layer 2 roaming
|
|
|
|
Distributed or centralized layer 3 roaming
|
|
|
|
|
|
|
|
Analytics
|
Embedded location analytics reporting and device tracking
|
|
|
|
Global L7 traffic analytics reporting per network, per device, & per application
|
|
|
|
|
|
|
|
LED Indicators
|
1 power/booting/firmware upgrade status
|
|
|
| |
|
|
Regulatory
|
RoHS
|
|
|
|
For additional country-specific regulatory information, please contact Meraki sales
|
|
|
|
|
|
|
|
Warranty
|
Indoor access point
|
|
|
|
Lifetime hardware warranty with advanced replacement included
|
|
|
|
|
|
|
|
Ordering Information
|
MR36-HW: Meraki MR36 Cloud Managed 802.11ax AP
|
|
|
|
MA-PWR-30W-XX: Meraki AC Adapter for MR Series (XX = US/EU/UK/AU)
|
|
|
|
MA-INJ-4: Meraki MR 802.3at PoE Injector (Power Cord Not Included)
|
|
|
|
MA-INJ-6: Meraki MR MultiGigabit 802.3bt Injector (Power Cord Not Included)
|
|
|
|
Note: Meraki access point license required.
|
|
|
|
|
|
|